top of page

Contracting 101: Before You Send That Invoice — Getting Federal Contract Billing Right

Writer: Melissa Jones
Melissa Jones
4 days ago
14 min read

Anyone who has been responsible for federal contract invoicing knows how frustrating the first few days of the month can become when something isn't working correctly. You may have a perfectly good accounting system, experienced employees, and established procedures, but one incorrect labor category, missing rate, or unmapped account can send everyone scrambling to figure out why the invoice won't reconcile.


A successful invoicing process begins long before anyone generates an invoice. The project needs to be configured correctly, costs must be reviewed and approved, funding needs to be monitored, and the person responsible for billing must understand the contract's requirements. When those activities are handled consistently throughout the month, invoice preparation becomes considerably easier.


Whether your invoices are generated directly from an accounting system or prepared manually using Excel, the underlying requirements are the same. Costs must be accurate, calculations must be verified, contractual limitations must be considered, and the final invoice must reconcile to the appropriate financial records.


A quick note about responsibilities: In many organizations, invoice preparation and submission are handled by Accounting, with support from Program Control, Contracts, and Operations. In smaller companies, those responsibilities may fall to just one or two people, and sometimes the business owner is handling all of them. Throughout this article, I'll refer to these functions to explain where responsibilities typically fall, but that doesn't mean you need a separate department or employee for each one. What matters is that the work gets done, the appropriate checks are in place, and someone understands how the contract requirements affect billing.


In this installment of Contracting 101, we'll look at what should happen before the first invoice, how to reconcile invoices for different contract types, and some common problems that can delay billing and payment.


Before the First Invoice: Get the Setup Right

In our previous articles, we discussed project accounting setup and the importance of bringing the right people together during the project kickoff. Those activities establish the foundation for accurate billing, and the first invoice is often where you discover whether everything was configured correctly.


Before performance begins, the individuals responsible for contract administration, financial oversight, and accounting should review the contract's billing requirements and ensure the accounting system reflects them. At a minimum, that review should address:

  • Contract structure: Contract type, CLINs and SLINs, task orders, billing periods, and applicable payment provisions.

  • Rates and calculations: Fixed prices, labor billing rates, indirect rates, fee arrangements, and any contract-specific limitations or ceilings.

  • Funding: Available funding, funding limitations, and the controls used to prevent billing beyond authorized amounts.

  • Supporting documentation: Required labor reports, travel receipts, cost reports, subcontractor invoices, or other backup.

  • Invoice instructions: Required invoice details, approval procedures, submission methods, and deadlines.

  • Accounting configuration: Project and labor category setup, applicable rate tables, revenue calculations, and mapping of General Ledger (GL) accounts to invoice billing headings, where applicable.


One practice I strongly recommend is testing the billing setup as soon as costs begin posting to the project. You don't need to wait until the first month closes to find out whether the system is calculating the correct rates or placing costs under the appropriate invoice headings. Generate a draft invoice, review the calculations, make corrections where necessary, and test again. Depending on your system, there may be specific processing steps or controls to consider, but the goal is to validate the setup without prematurely posting or submitting an invoice.


The first billing cycle should receive extra attention because it validates more than the accounting configuration. It also gives you an opportunity to confirm that timekeeping approvals, expense processing, financial reporting, and internal review procedures are working together. Finding a problem during this initial review is much easier than discovering it several months later and having to determine how many invoices were affected.


The Importance of Financial Oversight Before Billing

Whether your company has a dedicated Program Controller, a Project Manager who monitors the financials, or an owner who handles everything, someone needs to be paying attention to costs throughout the month.


In larger organizations, Program Control often provides this oversight by monitoring project expenditures, reviewing forecasts, tracking funding, and coordinating with Contracts, Operations, and Accounting. In smaller businesses, those same responsibilities may be handled by someone wearing several hats.


Regardless of who performs the work, costs should be reviewed and approved before they reach the invoice. Labor should go through appropriate timesheet approvals, while travel and Other Direct Costs (ODCs) should be reviewed for authorization, accuracy, and compliance with the contract's requirements.


The review should consider whether employees are charging the correct project and Project Labor Category (PLC), whether expenses are appropriate for the contract, and whether any customer approvals or contractual restrictions apply. The people approving these transactions need to understand what they're looking at, even if they're also responsible for preparing the invoice later.


Timekeeping Errors Can Stop Billing in Its Tracks

Timekeeping deserves particular attention because even a relatively small error can create significant problems during invoice reconciliation. An employee may continue charging an old PLC after moving into a new position, select the wrong project, or charge hours to a labor category that isn't included in the contract's billing setup. Similarly, travel or ODCs may be posted to an incorrect CLIN or project.


When those transactions reach billing, someone has to determine why the invoice doesn't reconcile, trace the discrepancy back to the original transaction, and coordinate the necessary corrections. Depending on the problem, that may involve timesheet corrections, expense report adjustments, or accounting voucher corrections, all of which create additional work for Payroll and Accounting.


It's particularly frustrating when the invoice is due on the fourth of the month and the team is spending the second or third trying to figure out why an employee's hours aren't billing correctly. Proper charge-code setup, employee training, and knowledgeable timesheet approvers can prevent a great deal of that frustration.


Funding Should Already Be Monitored

Funding is another area that needs attention throughout the month rather than waiting until the invoice is being prepared. Someone should be monitoring actual costs, forecasts, and remaining funding so contracts approaching their limits are identified early.


When funding is running low, additional attention should be applied to the billing process to ensure the invoice complies with the contract's funding and payment provisions. Accounting systems may allow costs to accumulate even when a funding or billing limitation has been reached, but that doesn't necessarily mean those costs can be included on the next invoice.


In larger organizations, Program Control typically helps monitor these situations and communicate with Contracts, Operations, and Accounting. In a smaller company, that responsibility may fall to the owner or whoever manages the project's financial performance. Regardless of who handles it, the funding position should be understood before the invoice is finalized.


Step One: Verify That All Costs Have Posted

Regardless of the accounting system, the billing process should begin with confirming that all applicable costs for the period have been posted and finalized. Accounting typically coordinates this process, although several departments may be responsible for completing the underlying transactions. In a smaller company, the same person may be handling the entire process.


Before reconciliation begins, verify that the following activities have been completed, as applicable:

  • Payroll and labor distribution have been processed, including necessary timesheet corrections.

  • Accounts Payable transactions, employee expenses, subcontractor invoices, and other direct costs have been posted.

  • Required approvals have been completed and any outstanding transactions affecting the billing period have been addressed.

  • Necessary corrections, reclassifications, and accounting adjustments have been processed.

  • The appropriate monthly project financial reports are available for reconciliation.


Once the period is ready, run the applicable project cost, GL, and financial reports. These reports provide the foundation for verifying the amounts included on the invoice.


The invoice should reconcile to the applicable monthly financial reports, with any differences understood and documented. That doesn't mean the invoice total will always equal the reported costs or revenue. Fixed-price billing, fee calculations, revenue recognition, and contractual limitations can create legitimate differences, but those differences should be explainable rather than accepted simply because the system produced them.


What About Costs That Aren't Being Billed?

There are situations where costs have legitimately posted to the accounting system but cannot yet be included on an invoice. One example is a delayed funding modification. The government or prime contractor may ask the company to continue performing while additional funding is being processed, and company leadership may decide to accept that risk.


In that situation, the contractor is essentially performing at risk. Costs continue to accumulate, but amounts exceeding the available funding cannot be billed until the necessary contractual authorization is in place and the contract permits reimbursement. A customer's assurance that a funding modification is forthcoming does not guarantee that the costs will ultimately be recoverable, so the business owner or company leadership should understand and approve the exposure before performance continues.


Those costs should be identified and tracked separately, maintaining visibility into the amount being held and the company's financial exposure. Once the modification is executed, the costs can be evaluated for billing based on the modification's terms and applicable contract requirements. The funding modification does not automatically make every previously incurred cost reimbursable.


Other costs may remain unbilled because they require corrections, additional documentation, or different treatment under the contract. Whatever the reason, unbilled costs should be identifiable, reconciled, and monitored so the company understands what remains outstanding and why.


Step Two: Reconcile the Invoice Based on Contract Type

Once the applicable costs have posted and the financial reports are available, the reconciliation process can begin. The specific procedures will depend on the contract and accounting system, but the primary considerations differ by contract type.


Firm-Fixed-Price (FFP)

For FFP contracts, the amount billed is generally determined by the contract's established prices and payment provisions rather than actual costs incurred. The reconciliation should focus on verifying that the invoice reflects the amounts the contractor is entitled to bill and that any conditions for payment have been satisfied.


I would typically review the following:

  • Contract pricing: Verify that the invoice agrees with the applicable CLIN, fixed price, milestone, delivery, or payment schedule.

  • Billing requirements: Confirm that any required performance milestones or other payment conditions have been satisfied and that the invoice contains the information required by the contract.

  • Revenue calculations: Verify that the accounting system is recognizing revenue correctly. Depending on the company's accounting policies, revenue recognized during the period may differ from the amount billed.

  • Financial reconciliation: Compare the invoice to the applicable monthly financial reports and confirm that any differences between billing and revenue are understood.

  • Final approval: Complete the company's established review and approval process before finalizing the invoice.


Although actual costs generally don't determine the amount of an FFP invoice, those costs still need to be monitored for profitability, forecasting, and project management. A contract can be billing correctly while experiencing significant financial performance problems, so the cost and revenue reviews remain important.


Cost-Plus-Fixed-Fee (CPFF)

For CPFF contracts, I would begin by running a project cost report or GL report to identify the direct costs charged to the contract during the billing period. Those amounts should reconcile to the direct costs included on the invoice, accounting for any costs that are excluded, withheld, or subject to different billing treatment.


Once direct costs reconcile, the review should address:

  • Indirect costs: Verify that the appropriate provisional billing rates and allocation bases are being used and that the system is calculating the indirect costs correctly.

  • Contractual limitations: Confirm that applicable indirect rate ceilings, exclusions, or other restrictions are reflected in the billing calculations.

  • Fee: Verify that the fixed fee is calculated and billed according to the contract's provisions, including any limitations on the amount or timing of fee payments.

  • Financial reconciliation: Compare the invoice to the monthly project financial reports and investigate any unexplained differences.

  • Supporting documentation: Verify that required cost reports, labor details, travel documentation, subcontractor invoices, and other backup agree with the amounts being billed.


Contract-specific billing provisions deserve particular attention. For example, a contract may establish an indirect rate ceiling, restrict indirect cost recovery on travel, or include special provisions affecting fee. Those requirements need to be reflected in the accounting setup and verified during reconciliation.


An accounting system can calculate an invoice exactly as configured while still producing an amount that doesn't comply with the contract. That's why understanding the contract's requirements is just as important as understanding how the billing system works.


Time-and-Materials (T&M)

For T&M contracts, the labor portion of the invoice is generally based on hours worked multiplied by the applicable contractual labor rates rather than the actual labor costs incurred. The reconciliation therefore begins with approved labor hours and the rate table established for the contract.


I would focus on:

  • Labor hours: Reconcile the hours included on the invoice to approved timesheets or labor distribution reports.

  • Labor categories and rates: Verify that employees are assigned to the correct billing categories and that the applicable contractual rates are being used, including any effective-date changes or modifications.

  • Travel, materials, and ODCs: Reconcile these costs to the underlying accounting records and verify that the appropriate contractual billing provisions have been applied.

  • Indirect costs and limitations: Review any applicable indirect calculations, restrictions, or ceilings associated with reimbursable materials and other costs.

  • Financial reconciliation: Verify that the invoice agrees with the underlying labor and cost records and that the relationship between billing and revenue recognition is understood.

  • Supporting documentation: Confirm that required labor details, travel receipts, expense reports, and other backup are complete and reconcile to the invoice.


One common issue is an incorrect labor rate table or effective date. The employee may have charged the correct hours to the correct project, but if the billing system applies the wrong labor rate, the invoice will still be incorrect. The same general approach applies to Labor-Hour contracts, adjusted for the specific contract requirements.


What If You're Preparing Invoices Outside Your Accounting System?

Not every federal contractor uses an accounting system that generates contract invoices automatically. Smaller businesses, in particular, may use Excel or another tool to prepare invoices using information exported from their accounting system. There's nothing inherently wrong with that approach, provided the company has appropriate controls in place and the resulting invoice meets the contract's requirements.


Preparing an invoice manually doesn't eliminate any of the reconciliation steps we've discussed. In fact, it can introduce additional opportunities for errors because billing calculations may depend on formulas, manually entered rates, and information transferred between systems.


Whether you're preparing an FFP, CPFF, or T&M invoice in Excel, you should still verify:

  • Source data: Confirm that payroll, AP, travel, and other applicable transactions have been finalized and that the information used to prepare the invoice agrees with the accounting records.

  • Labor hours and rates: Reconcile hours to approved timesheets and verify that the appropriate contractual billing rates and labor categories are being used.

  • Indirect costs and fee: Where applicable, verify the calculations, allocation bases, and contractual limitations. Don't assume the formulas are correct simply because they've worked on previous invoices.

  • Funding and billing limitations: Confirm that the invoice doesn't exceed applicable funding or billing ceilings and that any unbilled costs are properly tracked.

  • Financial reconciliation: Reconcile the completed invoice to the monthly financial reports, accounting for legitimate differences between costs, revenue, and billing.

  • Supporting documentation: Ensure that required backup agrees with the invoice and that the invoice itself contains all information required by the contract.


I would also recommend protecting formulas in Excel, controlling access to the invoice template, and maintaining a clear record of any changes. A formula accidentally overwritten during invoice preparation can create an error that's difficult to spot, particularly if the resulting amount still looks reasonable.


Finally, consider having someone other than the preparer review the completed invoice before submission. When calculations are performed outside the accounting system, that independent review becomes especially valuable. If you're a one-person operation, establish a documented self-review process and consider periodically having a qualified outside resource review your billing setup and calculations.


The accounting system may not be generating the invoice, but it should still provide the reliable financial records needed to support it. The same contractual requirements and internal controls apply regardless of whether the final invoice comes from Costpoint, QuickBooks, Excel, or another application.


Common Problems That Can Hold Up an Invoice

Even when the accounting system has been configured correctly, billing problems can arise from changes in contract requirements, employee charging errors, incomplete transactions, or issues that weren't identified during the initial setup. Some problems are specific to the accounting system, while others can affect any federal contractor.


Deltek Costpoint-Specific Issues

For companies using Deltek Costpoint, several configuration issues are worth checking when an invoice isn't calculating or reconciling as expected.

  • Incomplete rate tables or incorrect rate sequences: If a billing rate table is missing information or the defined rate sequence points to the wrong table, the system may apply an incorrect rate or fail to calculate the expected billing amount.

  • Rate ceilings: Depending on the configuration, Costpoint may allow costs to be charged to a project while limiting the amount eligible for billing. If a rate ceiling has been reached or configured incorrectly, the invoice may not agree with the expected calculations.

  • Billing ceilings: Costs may continue accumulating after a billing ceiling has been reached, even though the system limits the amount that can be invoiced. These situations require review to determine whether the ceiling is correct, whether costs should remain unbilled, or whether contractual action is necessary.

  • The dreaded "Other" line: In Costpoint's billing setup, GL accounts are mapped to specific invoice billing headings. If costs are posted to a GL account that hasn't been mapped, those costs appear under the "Other" line rather than the appropriate billing category. This is one you really want to catch during the first billing cycle. If the mapping isn't corrected, the problem can continue month after month, creating unnecessary reconciliation work and potentially requiring corrections to previously generated invoices.


Problems That Apply Regardless of Accounting System

Other common issues include:

  • Incorrect project or PLC charges: Employees charging the wrong project or labor category can create discrepancies between timesheets, financial reports, and invoice calculations. Correcting these transactions may require coordination with Payroll, Accounting, and the employees involved.

  • Invoices exceeding funding or billing limitations: Available funding and applicable billing restrictions should be verified before the invoice is finalized, particularly for contracts approaching their limits.

  • Incorrect invoice information: Missing contract numbers, incorrect CLINs, wrong billing periods, or other administrative errors can result in rejected invoices. The contract's billing instructions should be the reference for required information.

  • Inadequate supporting documentation: Missing or inconsistent backup can delay invoice acceptance and payment even when the underlying calculations are correct.

  • Invoices that don't reconcile to monthly financial reports: Differences between the invoice, project cost reports, and revenue reports should be investigated and explained before submission.


Many of these problems can be prevented through proper setup, employee training, timely transaction approvals, and regular communication among the people responsible for contract administration, project performance, financial oversight, and accounting. In a very small business, that communication might simply mean having a consistent checklist and taking the time to review the numbers before sending the invoice.


Step Three: Final Review and Approval

Once the invoice has been reconciled, it should proceed through the company's established review and approval process. The procedures will vary by organization, but I generally recommend having someone other than the preparer perform the final review when staffing permits.


The reviewer should confirm that the invoice agrees with the contract requirements, the calculations are correct, the supporting documentation reconciles, and any funding or billing limitations have been addressed. If corrections are necessary, the affected calculations should be reviewed again before the invoice is finalized.


If an error is discovered after submission, the company should follow the applicable customer and accounting system procedures for correcting, replacing, or adjusting the invoice. The appropriate action may depend on whether the invoice has already been accepted, rejected, or paid.


Step Four: Invoice Submission

After the invoice has been finalized and approved, it must be submitted according to the contract's instructions. For many subcontracts, that means emailing the invoice to a designated contact or uploading it to a customer-specified portal or file management system.


For many federal prime contracts, invoices are submitted through Wide Area Workflow (WAWF), which is part of the Procurement Integrated Enterprise Environment (PIEE). Other agencies and contract types may have different submission requirements, so the contract's instructions should always be followed.


Regardless of the submission method, the company should retain evidence of submission and monitor invoice acceptance, rejections, corrections, and payment status. Successfully submitting an invoice doesn't necessarily mean it has been accepted for payment.


We'll cover WAWF and practical invoice submission tips in a separate Contracting 101 article.


Bringing It All Together

A successful billing process depends heavily on what happens throughout the month. Accurate timekeeping, appropriate cost approvals, active funding monitoring, and properly configured accounting systems all contribute to the quality of the final invoice. When these processes are working as intended, the person preparing the invoice can focus on reconciling and finalizing it rather than researching problems that should have been identified weeks earlier.\


Whether you're a business owner handling invoicing yourself or part of a larger team with dedicated Accounting and Program Control personnel, the objective is the same: understand the contract, maintain accurate records, review costs as they're incurred, and verify the invoice before submitting it.


And for anyone who has spent the third of the month trying to figure out why an invoice suddenly stopped reconciling, you know exactly why these controls are worth the effort.


Free Resource: Invoice Preparation and Reconciliation Checklist

We've included a customizable checklist to help companies establish or review their internal billing procedures. It covers common pre-billing controls and provides additional review considerations for FFP, CPFF, and T&M contracts, including invoices prepared outside the accounting system.

Every company, accounting system, and contract has different requirements, so the checklist is intended as a starting point rather than a universal billing procedure.



Ally Compliance Solutions helps federal contractors strengthen Contracts Administration, Program Control, compliance, and financial management processes through consulting, fractional support, and practical training.

Comments


bottom of page